Developer / Contributor Guide

We’re happy you’re interested in contributing to the Cilium project.

This guide will help you make sure you have an environment capable of testing changes to the Cilium source code, and that you understand the workflow of getting these changes reviewed and merged upstream.

Setting up a development environment

Developer requirements

You need to have the following tools available in order to effectively contribute to Cilium:

Dependency Version / Commit ID Download Command
git latest N/A (OS-specific)
go 1.8.3 N/A (OS-specific)
go-swagger fbc64c26 go get -u
go-bindata a0ff2567cfb go get -u

To run Cilium locally on VMs, you need:

Dependency Version / Commit ID Download Command
Vagrant >= 1.8.3 Vagrant Install Instructions
VirtualBox (if not using libvirt) >= 5.1.22 N/A (OS-specific)

Finally, in order to build the documentation, you should have Sphinx installed:

$ sudo pip install sphinx

You should start with the Getting Started, which walks you through the set-up, such as installing Vagrant, getting the Cilium sources, and going through some Cilium basics.

Vagrant Setup

While the the Getting Started uses a Vagrantfile tuned for the basic walk through, the setup for the Vagrantfile in the root of the Cilium tree depends on a number of environment variables and network setup that are managed via contrib/vagrant/

Using the provided Vagrantfile

To bring up a Vagrant VM with Cilium plus dependencies installed, run:

$ contrib/vagrant/

This will create and run a vagrant VM based on the base box cilium/ubuntu-16.10. The box is currently available for the following providers:

  • libvirt
  • virtualbox


The following environment variables can be set to customize the VMs brought up by vagrant:

  • NWORKERS=n: Number of child nodes you want to start with the master, default 0.
  • RELOAD=1: Issue a vagrant reload instead of vagrant up
  • NFS=1: Use NFS for vagrant shared directories instead of rsync
  • K8S=1: Build & install kubernetes on the nodes
  • IPV4=1: Run Cilium with IPv4 enabled
  • VAGRANT_DEFAULT_PROVIDER={virtualbox | libvirt | ...}

If you want to start the VM with cilium enabled with IPv4, with kubernetes installed and plus a worker, run:

$ IPV4=1 K8S=1 NWORKERS=1 contrib/vagrant/

If you have any issue with the provided vagrant box cilium/ubuntu-16.10 or need a different box format, you may build the box yourself using the packer scripts

Manual Installation

Alternatively you can import the vagrant box cilium/ubuntu-16.10 directly and manually install Cilium:

$ vagrant init cilium/ubuntu-16.10
$ vagrant up
$ vagrant ssh [...]
$ cd go/src/
$ make
$ sudo make install
$ sudo cp contrib/upstart/* /etc/init/
$ sudo usermod -a -G cilium vagrant
$ sudo service cilium restart


Your Cilium tree is mapped to the VM so that you do not need to keep copying files between your host and the VM. The default sync method is rsync, which only syncs when the VM is brought up, or when manually triggered (vagrant rsync command in the Cilium tree). You can also use NFS to access your Cilium tree from the VM by setting the environment variable NFS (mentioned above) before running the startup script (export NFS=1). Note that your host firewall have the NFS UDP ports open, the startup script will give the address and port details for this.


OSX file system is by default case insensitive, which can confuse git. At the writing of this Cilium repo has no file names that would be considered referring to the same file on a case insensitive file system. Regardless, it may be useful to create a disk image with a case sensitive file system for holding your git repos.


VirtualBox for OSX currently (version 5.1.22) always reports host-only networks’ prefix length as 64. Cilium needs this prefix to be 16, and the startup script will check for this. This check always fails when using VirtualBox on OSX, but it is safe to let the startup script to reset the prefix length to 16.

If for some reason, running of the provisioning script fails, you should bring the VM down before trying again:

$ vagrant halt

Development Cycle

The Vagrantfile in the Cilium repo root (hereon just Vagrantfile), always provisions Cilium build and install when the VM is started. After the initial build and install you can do further building and testing incrementally inside the VM. vagrant ssh takes you to the Cilium source tree directory (/home/vagrant/go/src/ by default, and the following commands assume that being your current directory.


Assuming you have synced (rsync) the source tree after you have made changes, or the tree is automatically in sync via NFS or guest additions folder sharing, you can issue a build as follows:

$ make

A successful build should be followed by running the unit tests:

$ make tests


After a successful build and test you can re-install Cilium by:

$ sudo -E make install

Restart Cilium service

To run the newly installed version of Cilium, restart the service:

$ sudo service cilium restart

You can verify the service and cilium-agent status by the following commands, respectively:

$ service cilium status
$ cilium status


After the new version of Cilium is running, you should run the runtime tests:

$ sudo make runtime-tests

Building Documentation

Whenever making changes to Cilium documentation you should check that you did not introduce any new warnings or errors, and also check that your changes look as you intended. To do this you can build the docs:

$ make -C Documentation html

After this you can browse the updated docs as HTML starting at Documentation\_build\html\index.html.

Submitting a pull request

Contributions may be submitted in the form of pull requests against the github repository at:

Before hitting the submit button, please make sure that the following requirements have been met:

  • The pull request and all corresponding commits have been equipped with a well written commit message which explains the reasoning and details of the change.
  • You have added unit and/or runtime tests where feasible.
  • You have tested the changes and checked for regressions by running the existing testsuite against your changes. See the “Testsuite” section for additional details.
  • You have signed off on your commits, see the section “Developer’s Certificate of Origin” for more details.

Release Process

Cilium schedules a major release every 3 months. Each major release is performed by incrementing the Y in the version format X.Y.0. The group of committers can decide to increment X instead to mark major milestones in which case Y is reset to 0.

The following steps are performed to publish a release:

  1. The master branch is set to the version X.Y.90 at all times. This ensures that a development snapshot is considered more recent than a stable release at all times.
  2. The committers can agree on a series of release candidates which will be tagged vX.Y-rcN in the master branch.
  3. The committers declare the master branch ready for the release and fork the master branch into a release branch vX.Y+1.0.
  4. The first commit in the release branch is to change the version to X.Y+1.0.
  5. The next commit goes into the master branch and sets the version to X.Y+1.90 to ensure that the master branch will be considered more recent than any stable release of the major release that is about to be published.

Stable releases

The committers can nominate commits pushed to the master as stable release candidates in which case they will be backported to previous release branches. Upon necessity, stable releases are published with the version X.Y.Z+1.

Criteria for the inclusion into stable release branches are:

  • Security relevant fixes
  • Major bugfixes relevant to the correct operation of Cilium

Developer’s Certificate of Origin

To improve tracking of who did what, we’ve introduced a “sign-off” procedure.

The sign-off is a simple line at the end of the explanation for the commit, which certifies that you wrote it or otherwise have the right to pass it on as open-source work. The rules are pretty simple: if you can certify the below:

Developer Certificate of Origin
Version 1.1

Copyright (C) 2004, 2006 The Linux Foundation and its contributors.
1 Letterman Drive
Suite D4700
San Francisco, CA, 94129

Everyone is permitted to copy and distribute verbatim copies of this
license document, but changing it is not allowed.

Developer's Certificate of Origin 1.1

By making a contribution to this project, I certify that:

(a) The contribution was created in whole or in part by me and I
    have the right to submit it under the open source license
    indicated in the file; or

(b) The contribution is based upon previous work that, to the best
    of my knowledge, is covered under an appropriate open source
    license and I have the right under that license to submit that
    work with modifications, whether created in whole or in part
    by me, under the same open source license (unless I am
    permitted to submit under a different license), as indicated
    in the file; or

(c) The contribution was provided directly to me by some other
    person who certified (a), (b) or (c) and I have not modified

(d) I understand and agree that this project and the contribution
    are public and that a record of the contribution (including all
    personal information I submit with it, including my sign-off) is
    maintained indefinitely and may be redistributed consistent with
    this project or the open source license(s) involved.

then you just add a line saying:

Signed-off-by: Random J Developer <>

Use your real name (sorry, no pseudonyms or anonymous contributions.)