Debugging

Attaching a Debugger

Cilium comes with a set of Makefile targets for quickly deploying development builds to a local Kind cluster. One of these targets is kind-debug-agent, which generates a container image that wraps the Cilium agent with a Delve (dlv) invocation. This causes the agent process to listen for connections from a debugger front-end on port 2345.

To build and push a debug image to your local Kind cluster, run:

$ make kind-debug-agent

Note

The image is automatically pushed to the Kind nodes, but running Cilium Pods are not restarted. To do so, run:

$ kubectl delete pods -n kube-system -l app.kubernetes.io/name=cilium-agent

If your Kind cluster was set up using make kind, it will automatically be configured using with the following port mappings:

  • 23401: kind-control-plane-1

  • 2340*: Subsequent kind-control-plane-* nodes, if defined

  • 23411: kind-worker-1

  • 2341*: Subsequent kind-worker-* nodes, if defined

The Delve listener supports multiple debugging protocols, so any IDEs or debugger front-ends that understand either the Debug Adapter Protocol or Delve API v2 are supported.

Visual Studio Code

The Cilium repository contains a VS Code launch configuration (.vscode/launch.json) that includes debug targets for the Kind control plane, the first two kind-worker nodes and the Cilium Operator.

../../../_images/vscode-run-and-debug.png

The preceding screenshot is taken from the ‘Run And Debug’ section in VS Code. The default shortcut to access this section is Shift+Ctrl+D. Select a target to attach to, start the debug session and set a breakpoint to halt the agent or operator on a specific code statement. This only works for Go code, BPF C code cannot be debugged this way.

See the VS Code debugging guide for more details.

Neovim

The Cilium repository contains a .nvim directory containing a DAP configuration as well as a README on how to configure nvim-dap.

toFQDNs and DNS Debugging

The interactions of L3 toFQDNs and L7 DNS rules can be difficult to debug around. Unlike many other policy rules, these are resolved at runtime with unknown data. Pods may create large numbers of IPs in the cache or the IPs returned may not be compatible with our datapath implementation. Sometimes we also just have bugs.

Isolating the source of toFQDNs issues

While there is no common culprit when debugging, the DNS Proxy shares the least code with other system and so is more likely the least audited in this chain. The cascading caching scheme is also complex in its behaviour. Determining whether an issue is caused by the DNS components, in the policy layer or in the datapath is often the first step when debugging toFQDNs related issues. Generally, working top-down is easiest as the information needed to verify low-level correctness can be collected in the initial debug invocations.

REFUSED vs NXDOMAIN responses

The proxy uses REFUSED DNS responses to indicate a denied request. Some libc implementations, notably musl which is common in Alpine Linux images, terminate the whole DNS search in these cases. This often manifests as a connect error in applications, as the libc lookup returns no data. To work around this, denied responses can be configured to be NXDOMAIN by setting --tofqdns-dns-reject-response-code=nameError on the command line.

Monitor Events

The DNS Proxy emits multiple L7 DNS monitor events. One for the request and one for the response (if allowed). Often the L7 DNS rules are paired with L3 toFQDNs rules and events relating to those rules are also relevant.

Note

Be sure to run cilium-dbg monitor on the same node as the pod being debugged!

$ kubectl exec pod/cilium-sbp8v -n kube-system -- cilium-dbg monitor --related-to 3459
Listening for events on 4 CPUs with 64x4096 of shared memory
Press Ctrl-C to quit
level=info msg="Initializing dissection cache..." subsys=monitor

-> Request dns from 3459 ([k8s:org=alliance k8s:io.kubernetes.pod.namespace=default k8s:io.cilium.k8s.policy.serviceaccount=default k8s:io.cilium.k8s.policy.cluster=default k8s:class=xwing]) to 0 ([k8s:io.cilium.k8s.policy.serviceaccount=kube-dns k8s:io.kubernetes.pod.namespace=kube-system k8s:k8s-app=kube-dns k8s:io.cilium.k8s.policy.cluster=default]), identity 323->15194, verdict Forwarded DNS Query: cilium.io. A
-> endpoint 3459 flow 0xe6866e21 identity 15194->323 state reply ifindex lxc84b58cbdabfe orig-ip 10.60.1.115: 10.63.240.10:53 -> 10.60.0.182:42132 udp
-> Response dns to 3459 ([k8s:org=alliance k8s:io.kubernetes.pod.namespace=default k8s:io.cilium.k8s.policy.serviceaccount=default k8s:io.cilium.k8s.policy.cluster=default k8s:class=xwing]) from 0 ([k8s:io.cilium.k8s.policy.cluster=default k8s:io.cilium.k8s.policy.serviceaccount=kube-dns k8s:io.kubernetes.pod.namespace=kube-system k8s:k8s-app=kube-dns]), identity 323->15194, verdict Forwarded DNS Query: cilium.io. A TTL: 486 Answer: '104.198.14.52'
-> endpoint 3459 flow 0xe6866e21 identity 15194->323 state reply ifindex lxc84b58cbdabfe orig-ip 10.60.1.115: 10.63.240.10:53 -> 10.60.0.182:42132 udp
Policy verdict log: flow 0x614e9723 local EP ID 3459, remote ID 16777217, proto 6, egress, action allow, match L3-Only, 10.60.0.182:41510 -> 104.198.14.52:80 tcp SYN

-> stack flow 0x614e9723 identity 323->16777217 state new ifindex 0 orig-ip 0.0.0.0: 10.60.0.182:41510 -> 104.198.14.52:80 tcp SYN
-> 0: 10.60.0.182:41510 -> 104.198.14.52:80 tcp SYN
-> endpoint 3459 flow 0x7388921 identity 16777217->323 state reply ifindex lxc84b58cbdabfe orig-ip 104.198.14.52: 104.198.14.52:80 -> 10.60.0.182:41510 tcp SYN, ACK
-> stack flow 0x614e9723 identity 323->16777217 state established ifindex 0 orig-ip 0.0.0.0: 10.60.0.182:41510 -> 104.198.14.52:80 tcp ACK
-> 0: 10.60.0.182:41510 -> 104.198.14.52:80 tcp ACK
-> stack flow 0x614e9723 identity 323->16777217 state established ifindex 0 orig-ip 0.0.0.0: 10.60.0.182:41510 -> 104.198.14.52:80 tcp ACK
-> 0: 10.60.0.182:41510 -> 104.198.14.52:80 tcp ACK
-> endpoint 3459 flow 0x7388921 identity 16777217->323 state reply ifindex lxc84b58cbdabfe orig-ip 104.198.14.52: 104.198.14.52:80 -> 10.60.0.182:41510 tcp ACK
-> 0: 10.60.0.182:41510 -> 104.198.14.52:80 tcp ACK
-> stack flow 0x614e9723 identity 323->16777217 state established ifindex 0 orig-ip 0.0.0.0: 10.60.0.182:41510 -> 104.198.14.52:80 tcp ACK, FIN
-> 0: 10.60.0.182:41510 -> 104.198.14.52:80 tcp ACK, FIN
-> endpoint 3459 flow 0x7388921 identity 16777217->323 state reply ifindex lxc84b58cbdabfe orig-ip 104.198.14.52: 104.198.14.52:80 -> 10.60.0.182:41510 tcp ACK, FIN
-> stack flow 0x614e9723 identity 323->16777217 state established ifindex 0 orig-ip 0.0.0.0: 10.60.0.182:41510 -> 104.198.14.52:80 tcp ACK

The above is for a simple curl cilium.io in a pod. The L7 DNS request is the first set of message and the subsequent L3 connection is the HTTP component. AAAA DNS lookups commonly happen but were removed to simplify the example.

  • If no L7 DNS requests appear, the proxy redirect is not in place. This may mean that the policy does not select this endpoint or there is an issue with the proxy redirection. Whether any redirects exist can be checked with cilium-dbg status --all-redirects. In the past, a bug occurred with more permissive L3 rules overriding the proxy redirect, causing the proxy to never see the requests.

  • If the L7 DNS request is blocked, with an explicit denied message, then the requests are not allowed by the proxy. This may be due to a typo in the network policy, or the matchPattern rule not allowing this domain. It may also be due to a bug in policy propagation to the DNS Proxy.

  • If the DNS request is allowed, with an explicit message, and it should not be, this may be because a more general policy is in place that allows the request. matchPattern: "*" visibility policies are commonly in place and would supersede all other, more restrictive, policies. If no other policies are in place, incorrect allows may indicate a bug when passing policy information to the proxy. There is no way to dump the rules in the proxy, but a debug log is printed when a rule is added. Look for DNS Proxy updating matchNames in allowed list during UpdateRules. The pkg/proxy/dns.go file contains the DNS proxy implementation.

If L7 DNS behaviour seems correct, see the sections below to further isolate the issue. This can be verified with cilium-dbg fqdn cache list. The IPs in the response should appear in the cache for the appropriate endpoint. The lookup time is included in the json output of the command.

$ kubectl exec pod/cilium-sbp8v -n kube-system -- cilium-dbg fqdn cache list
Endpoint   Source   FQDN         TTL    ExpirationTime             IPs
3459       lookup   cilium.io.   3600   2020-04-21T15:04:27.146Z   104.198.14.52

As of Cilium 1.16, the ExpirationTime represents the next time that the entry will be evaluated for staleness. If the entry Source is lookup, then the entry will expire at that time. An equivalent entry with source connection may be established when a lookup entry expires. If the corresponding Endpoint continues to communicate to this domain via one of the related IP addresses, then Cilium will continue to keep the connection entry alive. When the expiration time for a connection entry is reached, the entry will be re-evaluated to determine whether it is still used by active connections, and at that time may expire or be renewed with a new target expiration time.

DNS Proxy Errors

REFUSED responses are returned when the proxy encounters an error during processing. This can be confusing to debug as that is also the response when a DNS request is denied. An error log is always printed in these cases. Some are callbacks provided by other packages via daemon in cilium-agent.

  • Rejecting DNS query from endpoint due to error: This is the “normal” policy-reject message. It is a debug log.

  • cannot extract endpoint IP from DNS request: The proxy cannot read the socket information to read the source endpoint IP. This could mean an issue with the datapath routing and information passing.

  • cannot extract endpoint ID from DNS request: The proxy cannot use the source endpoint IP to get the cilium-internal ID for that endpoint. This is different from the Security Identity. This could mean that cilium is not managing this endpoint and that something has gone awry. It could also mean a routing problem where a packet has arrived at the proxy incorrectly.

  • cannot extract destination IP:port from DNS request: The proxy cannot read the socket information of the original request to obtain the intended target IP:Port. This could mean an issue with the datapath routing and information passing.

  • cannot find server ip in ipcache: The proxy cannot resolve a Security Identity for the target IP of the DNS request. This should always succeed, as world catches all IPs not set by more specific entries. This can mean a broken ipcache BPF table.

  • Rejecting DNS query from endpoint due to error: While checking if the DNS request was allowed (based on Endpoint ID, destination IP:Port and the DNS query) an error occurred. These errors would come from the internal rule lookup in the proxy, the allowed field.

  • Timeout waiting for response to forwarded proxied DNS lookup: The proxy forwards requests 1:1 and does not cache. It applies a 10s timeout on responses to those requests, as the client will retry within this period (usually). Bursts of these errors can happen if the DNS target server misbehaves and many pods see DNS timeouts. This isn’t an actual problem with cilium or the proxy although it can be caused by policy blocking the DNS target server if it is in-cluster.

  • Timed out waiting for datapath updates of FQDN IP information; returning response: When the proxy updates the DNS caches with response data, it needs to allow some time for that information to get into the datapath. Otherwise, pods would attempt to make the outbound connection (the thing that caused the DNS lookup) before the datapath is ready. Many stacks retry the SYN in such cases but some return an error and some apps further crash as a response. This delay is configurable by setting the --tofqdns-proxy-response-max-delay command line argument but defaults to 100ms. It can be exceeded if the system is under load.

Identities and Policy

Once a DNS response has been passed back through the proxy and is placed in the DNS cache toFQDNs rules can begin using the IPs in the cache. There are multiple layers of cache:

  • A per-Endpoint DNSCache stores the lookups for this endpoint. It is restored on cilium startup with the endpoint. Limits are applied here for --tofqdns-endpoint-max-ip-per-hostname and TTLs are tracked. The --tofqdns-min-ttl is not used here.

  • A per-Endpoint DNSZombieMapping list of IPs that have expired from the per-Endpoint cache but are waiting for the Connection Tracking GC to mark them in-use or not. This can take up to 12 hours to occur. This list is size-limited by --tofqdns-max-deferred-connection-deletes.

  • A global DNSCache where all endpoint and poller DNS data is collected. It does apply the --tofqdns-min-ttl value but not the --tofqdns-endpoint-max-ip-per-hostname value.

If an IP exists in the FQDN cache (check with cilium-dbg fqdn cache list) then toFQDNs rules that select a domain name, either explicitly via matchName or via matchPattern, should cause IPs for that domain to have allocated Security Identities. These can be listed with:

$ kubectl exec pod/cilium-sbp8v -n kube-system -- cilium-dbg identity list
ID         LABELS
1          reserved:host
2          reserved:world
3          reserved:unmanaged
4          reserved:health
5          reserved:init
6          reserved:remote-node
323        k8s:class=xwing
           k8s:io.cilium.k8s.policy.cluster=default
           k8s:io.cilium.k8s.policy.serviceaccount=default
           k8s:io.kubernetes.pod.namespace=default
           k8s:org=alliance
...
16777217   fqdn:*
           reserved:world

Note that FQDN identities are allocated locally on the node and have a high-bit set so they are often in the 16-million range. Note that this is the identity in the monitor output for the HTTP connection.

In cases where there is no matching identity for an IP in the fqdn cache it may simply be because no policy selects an associated domain. The policy system represents each toFQDNs: rule with a FQDNSelector instance. These receive updates from a global NameManager in the daemon. They can be listed along with other selectors (roughly corresponding to any L3 rule):

$ kubectl exec pod/cilium-sbp8v -n kube-system -- cilium-dbg policy selectors
SELECTOR                                                                                                         USERS   IDENTITIES
MatchName: , MatchPattern: *                                                                                     1       16777217
&LabelSelector{MatchLabels:map[string]string{},MatchExpressions:[]LabelSelectorRequirement{},}                   2       1
                                                                                                                         2
                                                                                                                         3
                                                                                                                         4
                                                                                                                         5
                                                                                                                         6
                                                                                                                         323
                                                                                                                         6188
                                                                                                                         15194
                                                                                                                         18892
                                                                                                                         25379
                                                                                                                         29200
                                                                                                                         32255
                                                                                                                         33831
                                                                                                                         16777217
&LabelSelector{MatchLabels:map[string]string{reserved.none: ,},MatchExpressions:[]LabelSelectorRequirement{},}   1

In this example 16777217 is used by two selectors, one with matchPattern: "*" and another empty one. This is because of the policy in use:

apiVersion: cilium.io/v2
kind: CiliumNetworkPolicy
metadata:
  name: "tofqdn-dns-visibility"
spec:
  endpointSelector:
    matchLabels:
      any:org: alliance
  egress:
  - toPorts:
      - ports:
         - port: "53"
           protocol: ANY
        rules:
          dns:
            - matchPattern: "*"
  - toFQDNs:
      - matchPattern: "*"

The L7 DNS rule has an implicit L3 allow-all because it defines only L4 and L7 sections. This is the second selector in the list, and includes all possible L3 identities known in the system. In contrast, the first selector, which corresponds to the toFQDNS: matchName: "*" rule would list all identities for IPs that came from the DNS Proxy.

Unintended DNS Policy Drops

toFQDNSs policy enforcement relies on the source pod performing a DNS query before using an IP address returned in the DNS response. Sometimes pods may hold on to a DNS response and start new connections to the same IP address at a later time. This may trigger policy drops if the DNS response has expired as requested by the DNS server in the time-to-live (TTL) value in the response. When DNS is used for service load balancing the advertised TTL value may be short (e.g., 60 seconds).

Cilium honors the TTL values returned by the DNS server by default, but you can override them by setting a minimum TTL using --tofqdns-min-ttl flag. This setting overrides short TTLs and allows the pod to use the IP address in the DNS response for a longer duration. Existing connections also keep the IP address as allowed in the policy.

Any new connections opened by the pod using the same IP address without performing a new DNS query after the (possibly extended) DNS TTL has expired are dropped by Cilium policy enforcement. To allow pods to use the DNS response after TTL expiry for new connections, a command line option --tofqdns-idle-connection-grace-period may be used to keep the IP address / name mapping valid in the policy for an extended time after DNS TTL expiry. This option takes effect only if the pod has opened at least one connection during the DNS TTL period.

Datapath Plumbing

For a policy to be fully realized the datapath for an Endpoint must be updated. In the case of a new DNS-source IP, the FQDN identity associated with it must propagate from the selectors to the Endpoint specific policy. Unless a new policy is being added, this often only involves updating the Policy Map of the Endpoint with the new FQDN Identity of the IP. This can be verified:

$ kubectl exec pod/cilium-sbp8v -n kube-system -- cilium-dbg bpf policy get 3459
DIRECTION   LABELS (source:key[=value])   PORT/PROTO   PROXY PORT   BYTES   PACKETS
Ingress     reserved:unknown              ANY          NONE         1367    7
Ingress     reserved:host                 ANY          NONE         0       0
Egress      reserved:unknown              53/TCP       36447        0       0
Egress      reserved:unknown              53/UDP       36447        138     2
Egress      fqdn:*                        ANY          NONE         477     6
            reserved:world

Note that the labels for identities are resolved here. This can be skipped, or there may be cases where this doesn’t occur:

$ kubectl exec pod/cilium-sbp8v -n kube-system -- cilium-dbg bpf policy get -n 3459
DIRECTION   IDENTITY   PORT/PROTO   PROXY PORT   BYTES   PACKETS
Ingress     0          ANY          NONE         1367    7
Ingress     1          ANY          NONE         0       0
Egress      0          53/TCP       36447        0       0
Egress      0          53/UDP       36447        138     2
Egress      16777217   ANY          NONE         477     6

L3 toFQDNs rules are egress only, so we would expect to see an Egress entry with Security Identity 16777217. The L7 rule, used to redirect to the DNS Proxy is also present with a populated PROXY PORT. It has a 0 IDENTITY as it is an L3 wildcard, i.e. the policy allows any peer on the specified port.

An identity missing here can be an error in various places:

  • Policy doesn’t actually allow this Endpoint to connect. A sanity check is to use cilium-dbg endpoint list to see if cilium thinks it should have policy enforcement.

  • Endpoint regeneration is slow and the Policy Map has not been updated yet. This can occur in cases where we have leaked IPs from the DNS cache (i.e. they were never deleted correctly) or when there are legitimately many IPs. It can also simply mean an overloaded node or even a deadlock within cilium.

  • A more permissive policy has removed the need to include this identity. This is likely a bug, however, as the IP would still have an identity allocated and it would be included in the Policy Map. In the past, a similar bug occurred with the L7 redirect and that would stop this whole process at the beginning.

Mutexes / Locks and Data Races

Note

This section only applies to Golang code.

There are a few options available to debug Cilium data races and deadlocks.

To debug data races, Golang allows -race to be passed to the compiler to compile Cilium with race detection. Additionally, the flag can be provided to go test to detect data races in a testing context.

Race detection

To compile a Cilium binary with race detection, you can do:

$ make RACE=1

Note

For building the Operator with race detection, you must also provide BASE_IMAGE which can be the cilium/cilium-runtime image from the root Dockerfile found in the Cilium repository.

To run integration tests with race detection, you can do:

$ make RACE=1 integration-tests

Deadlock detection

Cilium can be compiled with a build tag lockdebug which will provide a seamless wrapper over the standard mutex types in Golang, via sasha-s/go-deadlock library. No action is required, besides building the binary with this tag.

For example:

$ make LOCKDEBUG=1
$ # Deadlock detection during integration tests:
$ make LOCKDEBUG=1 integration-tests

CPU Profiling and Memory Leaks

Cilium bundles gops, a standard tool for Golang applications, which provides the ability to collect CPU and memory profiles using pprof. Inspecting profiles can help identify CPU bottlenecks and memory leaks.

To capture a profile, take a sysdump of the cluster with the Cilium CLI or more directly, use the cilium-bugtool command that is included in the Cilium image after enabling pprof in the Cilium ConfigMap:

$ kubectl exec -ti -n kube-system <cilium-pod-name> -- cilium-bugtool --get-pprof --pprof-trace-seconds N
$ kubectl cp -n kube-system <cilium-pod-name>:/tmp/cilium-bugtool-<time-generated-name>.tar ./cilium-pprof.tar
$ tar xf ./cilium-pprof.tar

Be mindful that the profile window is the number of seconds passed to --pprof-trace-seconds. Ensure that the number of seconds are enough to capture Cilium while it is exhibiting the problematic behavior to debug.

There are 6 files that encompass the tar archive:

Permissions Size User  Date Modified Name
.rw-r--r--   940 chris  6 Jul 14:04  gops-memstats-$(pidof-cilium-agent).md
.rw-r--r--  211k chris  6 Jul 14:04  gops-stack-$(pidof-cilium-agent).md
.rw-r--r--    58 chris  6 Jul 14:04  gops-stats-$(pidof-cilium-agent).md
.rw-r--r--   212 chris  6 Jul 14:04  pprof-cpu
.rw-r--r--  2.3M chris  6 Jul 14:04  pprof-heap
.rw-r--r--   25k chris  6 Jul 14:04  pprof-trace

The files prefixed with pprof- are profiles. For more information on each one, see Julia Evan’s blog on pprof.

To view the CPU or memory profile, simply execute the following command:

$ go tool pprof -http localhost:9090 pprof-cpu  # for CPU
$ go tool pprof -http localhost:9090 pprof-heap # for memory

This opens a browser window for profile inspection.