cilium-operator-aws hive
Inspect the hive
cilium-operator-aws hive [flags]
Options
--ces-max-ciliumendpoints-per-ces int Maximum number of CiliumEndpoints allowed in a CES (default 100)
--ces-rate-limits string Configure rate limits for the CES controller. Accepts a list of rate limit configurations, must be a JSON formatted string. (default "[{\"nodes\":0,\"limit\":10,\"burst\":20}]")
--ces-slice-mode string Slicing mode defines how CiliumEndpoints are grouped into CES: either batched by their Identity ("cesSliceModeIdentity") or batched on a "First Come, First Served" basis ("cesSliceModeFCFS") (default "cesSliceModeIdentity")
--cluster-id uint32 Unique identifier of the cluster
--cluster-name string Name of the cluster. It must consist of at most 32 lower case alphanumeric characters and '-', start and end with an alphanumeric character. (default "default")
--clustermesh-concurrent-service-endpoint-syncs int The number of remote cluster service syncing operations that will be done concurrently. Larger number = faster endpoint slice updating, but more CPU (and network) load. (default 5)
--clustermesh-config string Path to the ClusterMesh configuration directory
--clustermesh-enable-endpoint-sync Whether or not the endpoint slice cluster mesh synchronization is enabled.
--clustermesh-enable-mcs-api Whether or not the MCS API support is enabled.
--clustermesh-endpoint-updates-batch-period duration The length of endpoint slice updates batching period for remote cluster services. Processing of pod changes will be delayed by this duration to join them with potential upcoming updates and reduce the overall number of endpoints updates. Larger number = higher endpoint programming latency, but lower number of endpoints revision generated. (default 500ms)
--clustermesh-endpoints-per-slice int The maximum number of endpoints that will be added to a remote cluster's EndpointSlice . More endpoints per slice will result in less endpoint slices, but larger resources. (default 100)
--clustermesh-sync-timeout duration Timeout waiting for the initial synchronization of information from remote clusters (default 1m0s)
--controller-group-metrics strings List of controller group names for which to to enable metrics. Accepts 'all' and 'none'. The set of controller group names available is not guaranteed to be stable between Cilium versions.
--enable-cilium-operator-server-access strings List of cilium operator APIs which are administratively enabled. Supports '*'. (default [*])
--enable-gateway-api-alpn Enables exposing ALPN with HTTP2 and HTTP/1.1 support for Gateway API
--enable-gateway-api-app-protocol Enables Backend Protocol selection (GEP-1911) for Gateway API via appProtocol
--enable-gateway-api-proxy-protocol Enable proxy protocol for all GatewayAPI listeners. Note that _only_ Proxy protocol traffic will be accepted once this is enabled.
--enable-gateway-api-secrets-sync Enables fan-in TLS secrets sync from multiple namespaces to singular namespace (specified by gateway-api-secrets-namespace flag) (default true)
--enable-ingress-controller Enables cilium ingress controller. This must be enabled along with enable-envoy-config in cilium agent.
--enable-ingress-proxy-protocol Enable proxy protocol for all Ingress listeners. Note that _only_ Proxy protocol traffic will be accepted once this is enabled.
--enable-ingress-secrets-sync Enables fan-in TLS secrets from multiple namespaces to singular namespace (specified by ingress-secrets-namespace flag) (default true)
--enable-k8s Enable the k8s clientset (default true)
--enable-k8s-api-discovery Enable discovery of Kubernetes API groups and resources with the discovery API
--enable-k8s-endpoint-slice Enables k8s EndpointSlice feature in Cilium if the k8s cluster supports it (default true)
--enable-node-ipam Enable Node IPAM
--enable-node-port Enable NodePort type services by Cilium
--enforce-ingress-https Enforces https for host having matching TLS host in Ingress. Incoming traffic to http listener will return 308 http error code with respective location in header. (default true)
--gateway-api-hostnetwork-enabled Exposes Gateway listeners on the host network.
--gateway-api-hostnetwork-nodelabelselector string Label selector that matches the nodes where the gateway listeners should be exposed. It's a list of comma-separated key-value label pairs. e.g. 'kubernetes.io/os=linux,kubernetes.io/hostname=kind-worker'
--gateway-api-secrets-namespace string Namespace having tls secrets used by CEC for Gateway API (default "cilium-secrets")
--gateway-api-service-externaltrafficpolicy string Kubernetes LoadBalancer Service externalTrafficPolicy for all Gateway instances. (default "Cluster")
--gateway-api-xff-num-trusted-hops uint32 The number of additional GatewayAPI proxy hops from the right side of the HTTP header to trust when determining the origin client's IP address.
--gops-port uint16 Port for gops server to listen on (default 9891)
-h, --help help for hive
--identity-gc-interval duration GC interval for security identities (default 15m0s)
--identity-gc-rate-interval duration Interval used for rate limiting the GC of security identities (default 1m0s)
--identity-gc-rate-limit int Maximum number of security identities that will be deleted within the identity-gc-rate-interval (default 2500)
--identity-heartbeat-timeout duration Timeout after which identity expires on lack of heartbeat (default 30m0s)
--ingress-default-lb-mode string Default loadbalancer mode for Ingress. Applicable values: dedicated, shared (default "dedicated")
--ingress-default-request-timeout duration Default request timeout for Ingress.
--ingress-default-secret-name string Default secret name for Ingress.
--ingress-default-secret-namespace string Default secret namespace for Ingress.
--ingress-default-xff-num-trusted-hops uint32 The number of additional ingress proxy hops from the right side of the HTTP header to trust when determining the origin client's IP address.
--ingress-hostnetwork-enabled Exposes ingress listeners on the host network.
--ingress-hostnetwork-nodelabelselector string Label selector that matches the nodes where the ingress listeners should be exposed. It's a list of comma-separated key-value label pairs. e.g. 'kubernetes.io/os=linux,kubernetes.io/hostname=kind-worker'
--ingress-hostnetwork-shared-listener-port uint32 Port on the host network that gets used for the shared listener (HTTP, HTTPS & TLS passthrough)
--ingress-lb-annotation-prefixes strings Annotations and labels which are needed to propagate from Ingress to the Load Balancer. (default [lbipam.cilium.io,service.beta.kubernetes.io,service.kubernetes.io,cloud.google.com])
--ingress-secrets-namespace string Namespace having tls secrets used by Ingress and CEC. (default "cilium-secrets")
--ingress-shared-lb-service-name string Name of shared LB service name for Ingress. (default "cilium-ingress")
--k8s-api-server string Kubernetes API server URL
--k8s-client-burst int Burst value allowed for the K8s client
--k8s-client-connection-keep-alive duration Configures the keep alive duration of K8s client connections. K8 client is disabled if the value is set to 0 (default 30s)
--k8s-client-connection-timeout duration Configures the timeout of K8s client connections. K8s client is disabled if the value is set to 0 (default 30s)
--k8s-client-qps float32 Queries per second limit for the K8s client
--k8s-heartbeat-timeout duration Configures the timeout for api-server heartbeat, set to 0 to disable (default 30s)
--k8s-kubeconfig-path string Absolute path of the kubernetes kubeconfig file
--k8s-service-proxy-name string Value of K8s service-proxy-name label for which Cilium handles the services (empty = all services without service.kubernetes.io/service-proxy-name label)
--kube-proxy-replacement string Enable only selected features (will panic if any selected feature cannot be enabled) ("false"), or enable all features (will panic if any feature cannot be enabled) ("true") (default "false")
--loadbalancer-l7-algorithm string Default LB algorithm for services that do not specify related annotation (default "round_robin")
--loadbalancer-l7-ports strings List of service ports that will be automatically redirected to backend.
--max-connected-clusters uint32 Maximum number of clusters to be connected in a clustermesh. Increasing this value will reduce the maximum number of identities available. Valid configurations are [255, 511]. (default 255)
--mesh-auth-mutual-enabled The flag to enable mutual authentication for the SPIRE server (beta).
--mesh-auth-spiffe-trust-domain string The trust domain for the SPIFFE identity. (default "spiffe.cilium")
--mesh-auth-spire-agent-socket string The path for the SPIRE admin agent Unix socket. (default "/run/spire/sockets/agent/agent.sock")
--mesh-auth-spire-server-address string SPIRE server endpoint. (default "spire-server.spire.svc:8081")
--mesh-auth-spire-server-connection-timeout duration SPIRE server connection timeout. (default 10s)
--operator-api-serve-addr string Address to serve API requests (default "localhost:9234")
--operator-pprof Enable serving pprof debugging API
--operator-pprof-address string Address that pprof listens on (default "localhost")
--operator-pprof-port uint16 Port that pprof listens on (default 6061)
--operator-prometheus-serve-addr string Address to serve Prometheus metrics (default ":9963")
--skip-crd-creation When true, Kubernetes Custom Resource Definitions will not be created
--validate-network-policy Whether to enable or disable the informational network policy validator (default true)
SEE ALSO
cilium-operator-aws - Run cilium-operator-aws
cilium-operator-aws hive dot-graph - Output the dependencies graph in graphviz dot format